Brand Introduction:
A concentrate of technology, innovation and application techniques for those who demand the maximum for the maintenance and protection of their vehicle: this is #Labocosmetica, a very high quality program made up of specific products for Car Detailing, the innovative discipline able to restore their splendor to all surfaces and protect them over time.
Born from the deep passion that has always linked the company to the world of car maintenance, the #Labocosmetica line was created to meet the requirements of professional detailers, until nowadays it has become a point of reference for international scale for all enthusiasts.
#Labocosmetica products are developed in the company’s Research and DevelopmentLaboratories and are all made in Italy. The close collaboration with professional Detailers has made it possible to create a range able to optimize treatment times while always guaranteeing an excellent finish in each of the 5 phases that guarantee the Detailing process: Washing, Decontamination, Polishing, Protection and Maintenance.
OFFICIAL PARTNER OF SUPERCAR OWNER CIRCLE (SOC):
Product Description
Ideal for removing marks, scratches and contamination. Perfect for all types of glass . balanced formula that guarantees a constant and regular cut. Specific polish designed for the removal of scratches and imperfections from glass surfaces. Its special formula consisting of a abrasive mixture with a high degree of purity composed of rare earths and cerium oxide , is balanced in order to obtain a high hardness and a constant and regular cut, characteristics that make #VITREO the solution suitable for restoring crystals, mirrors, windshield,and even the car headlights (the glass ones used mainly on vintage cars) under conditions like new. It can be used by hand as a decontaminated glass treatment before applying the antirain sealant or to remove previous old coatings applied.
Can be used on many areas:
Before and After on Bath Room glass door:
Instruction For Use:
Machine Polishing Method
Step 1: Cover the sensitive parts of the car with body repair tape such as fabric-plastic hoods and rubber moldings. To work for small areas at a time , we recommend boulders mo 20x20cm. Dampen the special micro pad of felt as thin as a disk and distribute the product evenly.
Step 2: During polishing, spray some water or our #LUBRIFICA to make it work better the product and avoid excessive overheating of the surface thus excluding the risk of creating micro-scratches. For the successful removal of scratches it is advisable to use the rotary polisher at a max speed of 1000 RPM using, preferably, a pad soft in order to reduce the vibrations of the micro pad in felt. In any case, avoid applying excessive pressure during processing to avoid overheating of the treated surface.
Step 3: For the removal of excess product it is recommended the use of a cloth in microfibre soft, clean and damp, as the surface will be hot after processing and this would create stains and halos. Do not perform more than 2 steps repeatedly on the same work area. If a further step is necessary, move to another area letting the previously treated surface cool down. Only resume processing when the surface is no longer hot. Repeat the operations described above until complete finishing.
Step 4: To eliminate stains of limestone and other contaminations such as pretreatment of the surface at the subsequent application of sealants such as ours #AQUAVELOX or nano coating anti-rain, you can use a random orbital polisher or a microfiber pad if used manually. To polish it is recommended to use the Rayon felt pad.
Manual Hand Polishing Method
Step 1: Cover the sensitive parts of the car with body repair tape such as fabric-plastic hoods and rubber moldings. To work for small areas at a time. During polishing, spray some water or our #LUBRIFICA to make it work better the product and avoid excessive overheating of the surface thus excluding the risk of creating micro-scratches.
Step 2: Spread some Labocosmetica VITREO onto Mafra Microfibre Application Pad.
Step 3: During the application process, ensure the solution is properly applied onto the surface with circular hand motion, this is to ensure the solution evenly mixed with the water or Labocosmetica LUBRIFICA (Refer to After in the pic below)
Step 4: To eliminate stains of limestone and other contaminations such as pretreatment of the surface at the subsequent application of sealants such as ours #AQUAVELOX or nano coating anti-rain.
Video:
CERTIFICATION:
3 TUV Certifications
Labocosmetica is the only company in the sector having 3 certifications, as below:
- TUV 9001 (Process and Organization)
- TUV 14001 (Environment Friendly)
- TUV 18001 (Product Security)
VDA Certification
LaboCosmetica is the first in the world to be certified from a German Bureau, declaring that the products are safe and they do not damage the surfaces.
PFAS Free
LaboCosmetica is the only producer declaring the products are without PFAS.
What is PFAS?
PFAS is a persistent harmful chemicals exist in many products, that can lead to adverse human health effects, such as:
- Low infant birth weights,
- Effects on the immune system,
- Cancer (for PFOA), and
- Thyroid hormone disruption (for PFOS).
OMNIA 2.0 and DERMA CLEANER 2.0 Certification:
EN 1276 - Chemical disinfectants and anti-septics - Bactericidal activity
EN 13697 - Chemical disinfectants and anti-septics - Bactericidal Activity - Without mechanical action
EN 14476 - Chemical disinfectants and anti-septics - Virucidal Activity in the medical area
Add some text to tell customers more about your product.
Brand Introduction:
A concentrate of technology, innovation and application techniques for those who demand the maximum for the maintenance and protection of their vehicle: this is #Labocosmetica, a very high quality program made up of specific products for Car Detailing, the innovative discipline able to restore their splendor to all surfaces and protect them over time.
Born from the deep passion that has always linked the company to the world of car maintenance, the #Labocosmetica line was created to meet the requirements of professional detailers, until nowadays it has become a point of reference for international scale for all enthusiasts.
#Labocosmetica products are developed in the company’s Research and DevelopmentLaboratories and are all made in Italy. The close collaboration with professional Detailers has made it possible to create a range able to optimize treatment times while always guaranteeing an excellent finish in each of the 5 phases that guarantee the Detailing process: Washing, Decontamination, Polishing, Protection and Maintenance.
OFFICIAL PARTNER OF SUPERCAR OWNER CIRCLE (SOC):
Product Description
Ideal for removing marks, scratches and contamination. Perfect for all types of glass . balanced formula that guarantees a constant and regular cut. Specific polish designed for the removal of scratches and imperfections from glass surfaces. Its special formula consisting of a abrasive mixture with a high degree of purity composed of rare earths and cerium oxide , is balanced in order to obtain a high hardness and a constant and regular cut, characteristics that make #VITREO the solution suitable for restoring crystals, mirrors, windshield,and even the car headlights (the glass ones used mainly on vintage cars) under conditions like new. It can be used by hand as a decontaminated glass treatment before applying the antirain sealant or to remove previous old coatings applied.
Can be used on many areas:
Before and After on Bath Room glass door:
Instruction For Use:
Machine Polishing Method
Step 1: Cover the sensitive parts of the car with body repair tape such as fabric-plastic hoods and rubber moldings. To work for small areas at a time , we recommend boulders mo 20x20cm. Dampen the special micro pad of felt as thin as a disk and distribute the product evenly.
Step 2: During polishing, spray some water or our #LUBRIFICA to make it work better the product and avoid excessive overheating of the surface thus excluding the risk of creating micro-scratches. For the successful removal of scratches it is advisable to use the rotary polisher at a max speed of 1000 RPM using, preferably, a pad soft in order to reduce the vibrations of the micro pad in felt. In any case, avoid applying excessive pressure during processing to avoid overheating of the treated surface.
Step 3: For the removal of excess product it is recommended the use of a cloth in microfibre soft, clean and damp, as the surface will be hot after processing and this would create stains and halos. Do not perform more than 2 steps repeatedly on the same work area. If a further step is necessary, move to another area letting the previously treated surface cool down. Only resume processing when the surface is no longer hot. Repeat the operations described above until complete finishing.
Step 4: To eliminate stains of limestone and other contaminations such as pretreatment of the surface at the subsequent application of sealants such as ours #AQUAVELOX or nano coating anti-rain, you can use a random orbital polisher or a microfiber pad if used manually. To polish it is recommended to use the Rayon felt pad.
Manual Hand Polishing Method
Step 1: Cover the sensitive parts of the car with body repair tape such as fabric-plastic hoods and rubber moldings. To work for small areas at a time. During polishing, spray some water or our #LUBRIFICA to make it work better the product and avoid excessive overheating of the surface thus excluding the risk of creating micro-scratches.
Step 2: Spread some Labocosmetica VITREO onto Mafra Microfibre Application Pad.
Step 3: During the application process, ensure the solution is properly applied onto the surface with circular hand motion, this is to ensure the solution evenly mixed with the water or Labocosmetica LUBRIFICA (Refer to After in the pic below)
Step 4: To eliminate stains of limestone and other contaminations such as pretreatment of the surface at the subsequent application of sealants such as ours #AQUAVELOX or nano coating anti-rain.
Video:
CERTIFICATION:
3 TUV Certifications
Labocosmetica is the only company in the sector having 3 certifications, as below:
- TUV 9001 (Process and Organization)
- TUV 14001 (Environment Friendly)
- TUV 18001 (Product Security)
VDA Certification
LaboCosmetica is the first in the world to be certified from a German Bureau, declaring that the products are safe and they do not damage the surfaces.
PFAS Free
LaboCosmetica is the only producer declaring the products are without PFAS.
What is PFAS?
PFAS is a persistent harmful chemicals exist in many products, that can lead to adverse human health effects, such as:
- Low infant birth weights,
- Effects on the immune system,
- Cancer (for PFOA), and
- Thyroid hormone disruption (for PFOS).
OMNIA 2.0 and DERMA CLEANER 2.0 Certification:
EN 1276 - Chemical disinfectants and anti-septics - Bactericidal activity
EN 13697 - Chemical disinfectants and anti-septics - Bactericidal Activity - Without mechanical action
EN 14476 - Chemical disinfectants and anti-septics - Virucidal Activity in the medical area
Add some text to tell customers more about your product.